Hi folks,
I have 2 HDMI TVs - the new one is 5 years old, the old one is 10 years old.
Pi works fine on new tv.
Pi does not work properly on old TV.
If I remove the SD card it shows on old TV with the relevant system information.
At one point I moved the running cable from new to old TV and it worked fine.
When I boot on the old TV I get no signal.
I have investigated and tried combinations of the various HDMI modes in the config.txt file to no avail. There seems to be no effect across both TVs.
Have updated including eeproom.
Wondering if due to imarure software on Pi 5 if HDMI config commands are not yet supported.
Any thought are most welcome![😁]()
Cheers
Nigel
I have 2 HDMI TVs - the new one is 5 years old, the old one is 10 years old.
Pi works fine on new tv.
Pi does not work properly on old TV.
If I remove the SD card it shows on old TV with the relevant system information.
At one point I moved the running cable from new to old TV and it worked fine.
When I boot on the old TV I get no signal.
I have investigated and tried combinations of the various HDMI modes in the config.txt file to no avail. There seems to be no effect across both TVs.
Have updated including eeproom.
Wondering if due to imarure software on Pi 5 if HDMI config commands are not yet supported.
Any thought are most welcome
Cheers
Nigel
Statistics: Posted by NigelSenior — Sat Jan 06, 2024 1:19 am