Thanks for the inputs. The Sococom script that set up the routing also added this to
/etc/network/interfaces:
auto wlan0
allow-hotplug wlan0
iface wlan0 inet dhcp
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
I have now commented it out and I can now see the Wifi SSD's are managed in NM again, so this is progress.
It would seem that this only applies to Bullseye.
I now have a wifi and soracom connection:Is there anything else I should be looking at?
Richard
/etc/network/interfaces:
auto wlan0
allow-hotplug wlan0
iface wlan0 inet dhcp
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
I have now commented it out and I can now see the Wifi SSD's are managed in NM again, so this is progress.
It would seem that this only applies to Bullseye.
I now have a wifi and soracom connection:
Code:
pi@raspberrypi:~ $ nmcli c sNAME UUID TYPE DEVICE preconfigured b794428b-787f-43b5-a630-5bfb8624b659 wifi wlan0 lo bb811d29-ed30-4283-8861-622935d7cabc loopback lo soracom 491329a4-fdcc-4560-b62c-77bfa0ad661d gsm ttyUSB2 TPLink e0663da1-4139-4a96-99d2-7e1334518d37 wifi -- Richard
Statistics: Posted by ratsea — Thu Jul 25, 2024 12:10 pm