yes! What is so complicated here?So does that attach onto the connector and I plug it into the gpio?You've most likely missunderstood 'driver'! Make use of this overlay https://github.com/raspberrypi/linux/bl ... verlay.dts
https://github.com/raspberrypi/linux/bl ... ADME#L4034
Working assumption is your Argon case fan has the same connector as the official one -> you will have to add Dupont connectors (https://www.berrybase.de/610-teiliges-d ... ststoffbox) to it (or connect it to the GPIO in another way).
Crimping the Dupont is easy, you can also buy such sets with the tool included .
Which pin on the fan connector is what is detailed here https://www.raspberrypi.com/documentati ... tor-pinout
EDIT:
not your fan bust another one with Dupont connectors, attached to GPIO
IMG_20250405_102957.jpg
So I buy another one that attaches via GPIO, or an adapter?
Statistics: Posted by Minecraftplayer2937 — Sun May 04, 2025 7:25 pm