With a 2-lane mode and no external synchronization, it is indeed difficult to meet the requirements you described.
However, the simplest solution would be to use a 4-lane capable camera board, which effectively doubles the frame rate and cuts the positional error in half.
Similar in size to the V3 camera, our compact IMX219 module (equivalent to the official V2 camera) supports both 4-lane operation and external synchronization, making it possible to achieve both high-speed capture and precise timing alignment.
Please note that external trigger mode requires a modified driver and a hardware connection for the sync signal input.
Additionally, the IMX219 supports a special binning mode that enables operation at 120 fps (4× speed) with 1640×1232 resolution.
This feature also requires custom driver modification to enable.
Please see below topic for 4-lane capable board.
viewtopic.php?t=389942
However, the simplest solution would be to use a 4-lane capable camera board, which effectively doubles the frame rate and cuts the positional error in half.
Similar in size to the V3 camera, our compact IMX219 module (equivalent to the official V2 camera) supports both 4-lane operation and external synchronization, making it possible to achieve both high-speed capture and precise timing alignment.
Please note that external trigger mode requires a modified driver and a hardware connection for the sync signal input.
Additionally, the IMX219 supports a special binning mode that enables operation at 120 fps (4× speed) with 1640×1232 resolution.
This feature also requires custom driver modification to enable.
Please see below topic for 4-lane capable board.
viewtopic.php?t=389942
Statistics: Posted by sohonomura2020 — Wed Jul 30, 2025 12:51 pm