Are we running Bullseye or other Raspberry Pi OS?
Have you checked the Pi4 with a loopback wire on GPIO 14/15?
For the UART configuration have you checked the official documenation https://www.raspberrypi.com/documentati ... ring-uarts
In this setup, with two uarts on a pico, I use on the Pi
Have you checked the Pi4 with a loopback wire on GPIO 14/15?
For the UART configuration have you checked the official documenation https://www.raspberrypi.com/documentati ... ring-uarts
In this setup, with two uarts on a pico, I use on the Pi
Code:
minicom -b 115200 -o -D /dev/serial0- Image may be NSFW.
Clik here to view.
Statistics: Posted by neilgl — Thu Feb 22, 2024 11:13 am
