issue no1:
Tested a triple head CM4 with below setup:
- SN65DSI84 DSI-to-LVDS bridge on DSI-1
- 1080x1920pixels monitor on HDMI-1
- 2560x1440pixels monitor on HDMI-2
The system comes up fine but shortly after system start the monitor on HDMI-2 is switched off.
The log shows below error messageNo further debugging is possible as the system is stuck somehow and because of issue no 2
issue no2:Using pastebinit is not working as it's not creating an output.
Tested a triple head CM4 with below setup:
- SN65DSI84 DSI-to-LVDS bridge on DSI-1
- 1080x1920pixels monitor on HDMI-1
- 2560x1440pixels monitor on HDMI-2
The system comes up fine but shortly after system start the monitor on HDMI-2 is switched off.
The log shows below error message
Code:
[ 72.418892] vc4-drm gpu: [drm] *ERROR* [CRTC:102:pixelvalve-2] flip_done timed out[ 128.806111] ieee80211 phy0: brcmf_p2p_send_action_frame: Unknown Frame: category 0xa, action 0x8issue no2:
Code:
pi@raspberrypi:~ $ raspinfo | pastebinithttps://paste.debian.net/Code:
pi@raspberrypi:~ $ uname -aLinux raspberrypi 6.12.0-v8+ #1819 SMP PREEMPT Wed Nov 20 14:49:27 GMT 2024 aarch64 GNU/LinuxStatistics: Posted by aBUGSworstnightmare — Thu Nov 28, 2024 9:34 am