Still completely irrelevant.
For example the old Altera Cyclone II has 'only' 10 MHz On-chip Oscillator but wipes the floor with the SLuG.
If you want a rough comparison, go in datasheet at:
3.3.11 Typical Building Block Performance
3.3.11.2 Register-to-Register Performance
16-bit Counter 79 MHz ('Under typical operating conditions')
Compared with (worst case scenarios):
Lattice iCE40 UltraPlus = 100 MHz
Gowin GW1 series = 271 MHz
Altera Cyclone II = 350 MHz
Gowin GW5 series = 573 MHz
All are performing better than listed above when working 'under typical operating conditions' like proper voltage, room temperature, better speed grade etc.
For example the old Altera Cyclone II has 'only' 10 MHz On-chip Oscillator but wipes the floor with the SLuG.
If you want a rough comparison, go in datasheet at:
3.3.11 Typical Building Block Performance
3.3.11.2 Register-to-Register Performance
16-bit Counter 79 MHz ('Under typical operating conditions')
Compared with (worst case scenarios):
Lattice iCE40 UltraPlus = 100 MHz
Gowin GW1 series = 271 MHz
Altera Cyclone II = 350 MHz
Gowin GW5 series = 573 MHz
All are performing better than listed above when working 'under typical operating conditions' like proper voltage, room temperature, better speed grade etc.
Statistics: Posted by gmx — Mon Oct 27, 2025 11:14 pm